Specifications
| Connection Inlet Flange | ASA/ANSI 6" DN 150 |
| Connection vacuum outlet flange | ASA/ANSI 3" DN 80 |
| Cooling Method | Water Cooling |
| Pressure Ultimate | 5.00 |
| Power Supply Voltage | Bareshaft without motor |
| Power Total Rated | 29820.00 |
IDX1300 - Dry Screw Pump, Bareshaft without motor 60 Hz
Variant
Explore the range of variants given below to compare the product
| Short Description | Part Number | Power Supply Voltage |
|---|---|---|
| A70904985 | AC 24V DC 24V | |
| A70914985 | Bareshaft without motor |
Dry Screw Pumps
Vacuum dry screw pumps are positive displacement pumps that are designed to operate in rough application conditions. These products do not use any lubricant in the pumping mechanism to seal therefore the are defined as dry compressing machines. They offer high pumping speed and can handle a wide range of gases and vapors. These pumps are ideal for applications in the industrial, chemical, pharmaceutical, and semiconductor industries, among others, where oil-free and contamination-free vacuum is required. They have a compact design and require minimal maintenance, making them a reliable and cost-effective solution for many vacuum applications.
IDX Dry Screw
The Edwards IDX dry pumps use the latest screw technology to provide a clean, effluent free vacuum. These pumps offer the ability to handle large volumes of dust and water vapor without any loss of performance while minimizing maintenance requirements and running costs. The IDX dry pumps are capable of continually operating from atmosphere to ultimate.
IDX1300
The IDX1300 is the new benchmark in performance for fast pumpdown of large chambers and high capacity pumping for industrial processes.
Based on the double-ended screw technology, the IDX Dry Vacuum Pump will give you all the reliability and performance you want for your process. The IDX outperforms all other dry pumps in robustness, performance and ease of operation, giving you faster pump-down from atmosphere and managing higher throughput at low pressures. Dry pumping systems reduce energy costs, eliminate effluent and can give significant improvements in product quality, making them the ideal solution for many coating and metallurgy processes.
Features and Benefits
- Improved Performance and Reliability
- Continuous performance from atmosphere to ultimate
- Excellent thermal profile and temperature control
- Tolerates liquid and particles
- Does not contaminate your process
- Cost Efficient and Environmentally Friendly
- Low power
- No effluent generation
- Dry running mechanism
- Designed for Reliability and Ease of Maintenance
- Flushable with water or solvent
- Elimination of compression plate for better dust handling
- Balanced rotor design
- Standard accessory modules
- Cooled and filtered oil
- Double-ended design for improved thermal stability
General Product Information
| Connection Inlet Flange |
ASA/ANSI 6"
DN 150 |
| Weight | 1705.00 |
| Connection vacuum outlet flange |
ASA/ANSI 3"
DN 80 |
| Leak Rate | 1.000 × 10⁻⁴ |
| Power Supply Phase | 3-Ph |
| Power Supply Voltage | Bareshaft without motor |
| Dimension Length | 2.46 |
| Power Supply Frequency | 60 Hz |
| Dimension Height | 1.00 |
| Dimension Width | 0.749 |
| Noise / Sound Level | 82.00 db(A) |
| Cooling Method | Water Cooling |
| Connection Cooling |
1/2" BSPP (G) Male
1/2" NPT Male |
| Connection Inlet / Outlet Flange | ASA/ANSI 6" / ASA/ANSI 3" |
| Dimension Comments | The dimensions length, width and height try to describe the outer shape of this particular product in its typical orientation when standing on the ground. We always recommend checking the detailed dimensions given in 2D drawings in the instruction manual or the 3D shapes given in 3D models. |
| connectionPurgeGasBallastVentConnector | 1/4" BSPP (or G 1/4") Female |
Operation Conditions - Limitations
| Pressure Absolute Inlet Continous Max | 1.000 × 10⁸ |
| Altitude Max | 1000.00 |
| Oil Capacity Min | 5.000 × 10⁻³ |
| Oil Capacity Max | 5.500 × 10⁻³ |
| Flow Cooling Water Min | 1.667 × 10⁻⁴ |
| Temperature Cooling Water Max | 308.15 |
| Temperature Cooling Water Min | 278.15 |
| Pressure Absolute Outlet Continous Max | 105.00 |
| The specific conditions to operate the machine reliably and safely like cooling water flows, purge flows and so on, and in detail described in the instruction manual please read the correct sections of the manual. |
Environmental Conditions
| Temperature Ambient Operation Max | 313.15 |
| Temperature Ambient Operation Min | 253.15 |
| Temperature Ambient Storage Min | 253.15 |
| Temperature Ambient Storage Max | 323.15 |
Classification
| Classification Product Pressure Range |
Medium Vacuum: 1 mbar - 1·10⁻³ mbar
Rough Vacuum: 1000 mbar - 1 mbar |
| Classification High / Medium / Rough Vacuum pump | Medium Vacuum Pump |
| Classification Dry or Wet Pump | Dry |
| Classification Vacuum Pump Technology | Dry Screw Pump |
Performance Data
| Power Total Rated | 29820.00 |
| Pressure Ultimate | 5.00 |
| Nominal rotational speed | 86.42 |
| Pumping Speed Air Nitrogen (@50Hz or max @default setting) | 0.306 |
| Warm Up Time | 5400.00 |
Lubricants
| Default Oil Type | Mobil SHC 629 |
Material of Construction
| Material of Construction | SG iron, Gray iron, Steel, Aluminum/copper, Stainless steel, Rubber, Brass/iron, PTFE, Fluoroelastomer (Viton) |
| Material Rotor | Cast Iron GGG40 |
| Material Stator | Cast Iron GGG40 |
- P60061356 - Pump Module.pdf - Brazilian Portuguese - Instructions
- A70801856 - Instructions.pdf - Brazilian Portuguese - Instructions
- P60061351 - Pump Module.pdf - Czech - Instructions
- A70801851 - Instructions.pdf - Czech - Instructions
- P60073500 - Pump Module.pdf - English - Instructions
- P60074000 - Pump Module.pdf - English - Instructions
- P60061300 - Pump Module.pdf - English - Instructions
- A70801880 - Instructions.pdf - English - Instructions
- P60102806 - Instructions.pdf - English - Instructions
- A70810840 - Service Instructions.pdf - English - Instructions
- P60073000 - Pump Module.pdf - English - Instructions
- P60071600 - Pump Module.pdf - English - Instructions
- A70801840 - Installation.pdf - English, French, Italian, German, Korean, Japanese - Instructions
- P60073583 - Pump Module.pdf - French - Instructions
- P60074083 - Pump Module.pdf - French - Instructions
- P60061383 - Pump Module.pdf - French - Instructions
- A70801883 - Instructions.pdf - French - Instructions
- A70801883 - Instructions.pdf - French - Instructions
- P60102806_FR - Instructions.pdf - French - Instructions
- P60073083 - Pump Module.pdf - French - Instructions
- P60074082 - Pump Module.pdf - German - Instructions
- P60061382 - Pump Module.pdf - German - Instructions
- A70801882 - Instructions.pdf - German - Instructions
- P60102806_DE - Instructions.pdf - German - Instructions
- A70810842 - Service Instructions.pdf - German - Instructions
- P60073082 - Pump Module.pdf - German - Instructions
- A70801849 - Instructions.pdf - Hungarian - Instructions
- P60073584 - Pump Module.pdf - Italian - Instructions
- P60074084 - Pump Module.pdf - Italian - Instructions
- P60061384 - Pump Module.pdf - Italian - Instructions
- A70801884 - Instructions.pdf - Italian - Instructions
- P60073084 - Pump Module.pdf - Italian - Instructions
- A70801852 - Instructions.pdf - Polish - Instructions
- A70801857 - Instructions.pdf - Russian - Instructions
- P60061346 - Pump Module.pdf - Simplified Chinese - Instructions
- A70801846 - Instructions.pdf - Simplified Chinese - Instructions
- A70801846 - Instructions.pdf - Simplified Chinese - Instructions
- P60102806_ZH - Instructions.pdf - Simplified Chinese - Instructions
- A70801888 - Instructions.pdf - Spanish (European) - Instructions
- P60102806_ES - Instructions.pdf - Spanish (European) - Instructions
- A70801889 - Instructions.pdf - Swedish - Instructions
- A70801859 - Instructions.pdf - Turkish - Instructions
| Product Title | Part Number | Price | Add to cart |
|---|---|---|---|
| Mobil SHC 629 - Vacuum Pump Oil, 1 x 4 l, H11023011 | H11023011 | EUR 320.00 | |
| Filter (DIN150), A22305078 | A22305078 | EUR 287.00 | |
| Pipe Check Valve-Mist Filter, A70801174 | A70801174 | EUR 37.60 | |
| Air Bleed replacement Kit CDX1300, A70904801 | A70904801 | EUR 203.00 | |
| Oil Mist Filter, A22304225 | A22304225 | EUR 316.00 |